Typical MOQ & Development Lead Time
Private-label requirements vary by production method, product structure, finish and packaging. The reference below helps buyers understand the typical starting point before a specification is reviewed.
Typical MOQ for Stainless Steel Sink Programs
| Program | Typical MOQ | Buyer Notes |
|---|---|---|
| Handmade Sink — Existing Model | MOQ: 30-50pcs | Notes: Suitable for buyers starting from an existing Matrix model with standard specifications. |
| Custom Handmade Sink | MOQ: 100pcs | Notes: Custom dimensions, bowl structure, drain position or other specifications should be reviewed before confirmation. |
| Pressed Sink — Existing Mold | MOQ: 300-500pcs | Notes: MOQ depends on the selected mold, material thickness, finish and production arrangement. |
| Pressed Sink — New Mold / Tooling | Usually 1000-1500pcs | Notes: Tooling cost, development quantity and production MOQ are reviewed based on the new sink design. |
| Workstation Sink Program | MOQ: 30-50pcs | Notes: Accessory configuration and private-label packing may affect the practical starting quantity. |
| Logo / Private-Label Packaging | MOQ: 100pcs | Notes: Logo, custom carton, labels and accessories may have different minimum quantities from the sink itself. |
Mixed-model orders can be reviewed case by case. The practical MOQ depends on production method, finish, accessories, packaging and how the models can be arranged within the same production order.
Development & Production Reference
| Stage | Typical Time | What Is Confirmed |
|---|---|---|
| Specification Review | Time: 1–2 working days | Confirmed: Product type, dimensions, material, gauge, finish, quantity and customization scope. |
| Drawing / Feasibility Review | 2–3 working days | Confirmed: Structure, dimensions, drain position, radius and production route. |
| Existing Model Sample | 5–7 working days | Confirmed: Product, finish, accessories and basic branding requirements. |
| Custom Handmade Sink Sample | 10–15 working days | Confirmed: Custom dimensions, structure, finish and product details. |
| Logo / Branding Sample | 10–15 working days | Confirmed: Logo method, position, size and visibility. |
| Private-Label Packaging Review | 2–3 working days | Confirmed: Carton artwork, SKU, barcode, label, instructions and accessory arrangement. |
| New Pressed Sink Mold Development | 5–7 working days | Confirmed: Tooling, trial forming, dimensions and sample approval. |
| Bulk Production | Usually 35-45 days | Confirmed: Approved product specification, finish, logo, accessories and packaging. |
Lead time starts after the required product specifications, artwork, sample requirements and commercial terms are confirmed.
What Can Affect MOQ or Lead Time?
Production Method
Handmade and pressed sinks have different production arrangements and practical minimum quantities.
Existing Model vs New Development
Existing products normally require less development than a new size, structure or pressed mold.
Material & Thickness
Special material grades or non-standard thicknesses may affect raw-material purchasing requirements.
Surface Finish
Standard brushed finishes and specialty PVD / colored finishes may have different production requirements.
Accessories
Workstation grids, baskets, colanders, cutting boards and other accessories may have separate minimum quantities.
Private-Label Packaging
Custom printed cartons, labels, instructions and retail packaging may have their own supplier MOQ.
Order Mix
Several models may sometimes be combined, but feasibility depends on production method, finish and order structure.
Not Sure Which MOQ Applies to Your Program?
Send the target sink model or drawing, expected quantity, finish and packaging requirement. Matrix can review the suitable production route and practical starting quantity before sample development.
